262175
142
Revision A
C
C
B
A
D
ϭϬϰϮϭϳϲ
Figure 5.100: Float Removal
7.
Remove the float as follows:
•
If the HarvestTouch
™
Display shows the message
“
Resume Float?
”
, then select NO (A).
•
If the HarvestTouch
™
Display does
NOT
show the message, then select FLOAT ADJUST (B), select switch (C), and
confirm the switch and float settings (D) are grayed out.
IMPORTANT:
Removing the float will release the tension in the float springs. This will prevent damage to the header lift linkages
when lowering the legs without a header or weight box attached to the windrower.
