262175
43
Revision A
3.11
Installing Rear Ballast Package
–
For use with Draper Headers Only
Ballast must be added to the aft end of the windrower when it is paired with a heavy header.
NOTE:
If pairing the windrower with an auger or rotary disc header, skip this procedure.
1.
On one of the following tables, locate the draper header that be will paired with the windrower, and check if any
ballast kits are required:
•
D2 Series Draper Headers: Table
•
D1X and D1XL Series Draper Headers: Table
2.
Install any ballast kits according to the instructions provided with the kit.
