MacDon HC10, Setup, Operation, And Parts Manual

Page: 31 / 186

215593
21
Revision A
$
%
& &
Figure 3.12: Adapter Plate
7. Retrieve the following parts from MD #B4798:
•
Hydraulic completion assembly
Retrieve the following parts from the finishing package
shipped with MD #B4798:
•
Adapter plate (MD #159734)
Retrieve the following parts from the hardware bag shipped
with MD #B4798:
•
Two 5/8 x 1 in. bolts (MD #113611)
•
Two 5/8 in. flange nuts (MD #50225)
Retrieve the following parts from the loose parts package
shipped with MD #B4799:
•
Two 5/8 in. flange nuts (MD #50225)
•
One 5/8 x 7 1/2 in. hex bolt (MD #135906)
Attach adapter plate (A) to the left center leg.
8. Install 5/8 x 7 1/2 in. hex bolt (B) (MD #135906) through
bracket, spacer, and adapter plate (A).
NOTE:
On headers with a sheet metal hose cover, install bolts from
the outboard side.
9. Secure bolts with two 5/8 in. flange nuts (C). Tighten nuts.
$
%
& &
Figure 3.13: Hose Assembly
10. Attach hose assembly (A) to adapter plate (B) using two
5/8 x 1 in. bolts (B)and two 5/8 in. flange nuts (C).
11. Tighten nuts (C).
UNLOADING AND ASSEMBLY