215593
11
Revision A
2.2
Specifications
NOTE:
Specifications and design are subject to change without notice or obligation to revise previously sold units.
Item
Specification
Frame and Structure
Total Weight (estimated)
770 kg (1700 lb.)
Carrier (North America only)
MacDon M150, M155, M155
E4
, and M200 Windrowers
2
Carrier (Export only)
MacDon M100, M105, M150, M155, M155
E4
, and M200 Windrowers
Header
MacDon double-knife (timed only) drive D60, D65, and D1 Series Draper
Headers
Manual Storage
In windrower cab
Drives
Main Conditioner
80 cc (4.9 cu in.) hydraulic motor
Feed Deck
65 cc (4.0 cu in.) hydraulic motor with 921 psi relief
Connections
Flat-faced quick attach couplers
–
connect under pressure
Normal Operating
Pressure
Conditioner
17.0
–
20.7 MPa (2500
–
3000 psi)
Feed Deck
4.1 MPa (600 psi)
Conditioner
Drive
Hydraulic motor to belt-driven roll to open timing gear system
Header Size
4.6 m (15 ft.)
6.1 m (20 ft.) and
7.6 m (25 ft.)
9.1 m (30 ft.)
3
Roll Speed
772
–
977 rpm
720
–
874 rpm
695
–
927 rpm
Feed Draper Speed
437
–
553 fpm
407
–
495 fpm
393
–
525 fpm
Roll Type
Intermeshing steel bars
Roll Diameter
233 mm (9.17 in.) / 168.4 mm (6.63 in.) OD tube
Roll Length
1830 mm (72 in.)
Swath Width
915
–
2540 mm (36
–
102 in.)
Forming Shields
Header-mounted tractor-supported adjustable forming shield system
IMPORTANT:
To avoid excessive vibration and poor performance, the HC10 Hay Conditioner should
NOT
be attached to single-knife drive
headers. The HC10 Hay Conditioner is
NOT
intended for use with the M205 Self-Propelled Windrower.
NOTE:
The HC10 is for use on M100 and M105 Self-Propelled Windrowers
ONLY
in markets outside of North America.
2.
M1170 Windrowers with compatibility kit (MD #B6978).
3.
To avoid poor performance, the HC10 Hay Conditioner should
NOT
be attached to 9.1 m (30 ft.) draper headers in
heavy crop conditions.
Summary of Contents for HC10
