MacDon HC10, Setup, Operation, And Parts Manual

Page: 155 / 186

215593
145
Revision A
7.2 Conversion Chart
Both SI units (including metric) and US customary units (sometimes referred to as standard units) of measurement are used
in this manual. A list of those units along with their abbreviations and conversion factors is provided here for your
reference.
Table 7.15 Conversion Chart
Quantity SI Units (Metric)
Factor
US Customary Units (Standard)
Unit Name Abbreviation Unit Name Abbreviation
Area hectare ha x 2.4710 =
acre acres
Flow
liters per minute
L/min x 0.2642 =
US gallons per minute
gpm
Force Newton N x 0.2248 =
pound force
lbf
Length
millimeter
mm
x 0.0394 = inch in.
Length meter m
x 3.2808 = foot ft.
Power kilowatt kW x 1.341 =
horsepower hp
Pressure
kilopascal
kPa
x 0.145 =
pounds per square inch psi
Pressure
megapascal
MPa x 145.038 =
pounds per square inch
psi
Pressure
bar (Non-SI)
bar x 14.5038 =
pounds per square inch
psi
Torque
Newton meter Nm x 0.7376 =
pound feet or
foot pounds
lbf·ft
Torque
Newton meter Nm x 8.8507 =
pound inches or
inch pounds
lbf·in
Temperature
degrees Celsius
°C
(°C x 1.8) + 32 = degrees Fahrenheit
°F
Velocity meters per minute
m/min x 3.2808 =
feet per minute
ft/min
Velocity meters per second
m/s x 3.2808 = feet per second ft/s
Velocity kilometers per hour km/h
x 0.6214 =
miles per hour mph
Volume liter L x 0.2642 =
US gallon US gal
Volume milliliter mL x 0.0338 =
ounce oz.
Volume cubic centimeter
cm 3 or cc
x 0.061 =
cubic inch
in. 3
Weight kilogram kg
x 2.2046 =
pound
lb.
REFERENCE