4.
Pull endshield at handle depression (A). Endshield
is retained by a hinge tab (B) and will open in
direction (C).
Figure 5.36: Left Endshield
5.
Pull the endshield free of hinge tab (A) if additional
clearance is required, and swing shield towards the
rear of the header.
6.
Engage safety catch (B) on hinge arm to secure the
shield in fully open position.
Figure 5.37: Left Endshield
Adjusting the endshield gap:
7.
Loosen the four bolts (A) on the support tube
bracket (B).
Figure 5.38: LH Endshield Support Tube
214017
73
Revision A
