2.3
Removing Shipping Supports
NOTE:
Unless otherwise specified, discard all shipping materials
and hardware.
1.
Cut straps and remove draper header supports (A)
from shipping support. Set draper header supports
aside for reinstallation.
Figure 2.12: Straps, Draper Header Supports,
and Shipping Supports
2.
Single reel only:
Cut banding (A) securing reel to
cutterbar and backtube.
Figure 2.13: Single Reel
3.
Remove four bolts (A) securing upper support (B) to
header legs and remove support.
Figure 2.14: Upper Support
214017
13
Revision A
