5
Performing Predelivery Checks
This machine has been set at the factory and should not require further adjustments; however, the following
checks will ensure your machine provides maximum performance. If adjustments are necessary, follow the
procedures in this chapter.
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
before making adjustments to machine.
IMPORTANT:
To avoid machine damage, check that no shipping dunnage has fallen into the machine.
1.
Perform the final checks as listed on the
Predelivery Checklist
(yellow sheet attached to this instruction –
Predelivery Checklist, page 101
) to ensure the machine is field-ready. Refer to the following pages for detailed
instructions as indicated on the Checklist. The completed Checklist should be retained either by the Operator
or the Dealer.
5.1
Checking Tire Pressure: Transport and Stabilizer Wheels
Check tire inflation pressure. If necessary, inflate tires according to the following table:
Table 5.1 Tire Inflation Pressure
Tire
Size
Pressure
Goodyear Wrangler RT/S
205/75 R15
40 psi (276 kPa)
Carlisle and Titan
ST205/75 R15
65 psi (448 kPa)
IMPORTANT:
Do
NOT
exceed maximum pressure specified on tire sidewall.
214017
53
Revision A
