1.
Wipe grease fitting with a clean cloth before greasing
to avoid injecting dirt and grit.
2.
Inject grease through fitting with grease gun until
grease overflows fitting (except where noted).
3.
Leave excess grease on fitting to keep out dirt.
4.
Replace any loose or broken fittings immediately.
5.
Remove and thoroughly clean any fitting that will
not take grease.
Also clean lubricant passageway.
Replace fitting if necessary.
6.
Use
clean,
high-temperature,
extreme-pressure
grease only.
Figure 5.42: Single-Knife Header Master Grease
Point Decal
Figure 5.43: Double-Knife Header Master
Grease Point Decal
214017
76
Revision A
