3. Remove the four bolts (A) securing the reel tube to the
U-joint
fl
ange (B).
Figure 5.236: U-Joint
4. Move the right-hand reel sideways to separate the reel
tube (A) from the U-joint (B).
5. Remove the drive chain (C).
6. Route the new chain (C) over the U-joint (B), and
position onto the sprockets.
Figure 5.237: Replacing Chain
7. Position the right-hand reel tube (A) against the reel
drive, and engage the stub shaft into the U-joint
pilot hole.
8. Rotate the reel until the holes in end of the reel tube
and U-joint
fl
ange (B) line up.
9. Apply Loctite
®
#243 (or equivalent) to four 1/2 in.
bolts (A), and secure with lock washers.
10. Torque to 102–115 N·m (75–85 ft·lbf).
Figure 5.238: U-Joint
214044
209
Revision A