4. Install the new bearing assembly (C) by pressing
the outer race of the bearing into the tube until it is
14–15 mm (9/16–19/32 in.) (B) from the outside edge
of the tube.
NOTE:
Before installing new seal,
fi
ll area (A) with 8 pumps
of grease.
Figure 5.127: Idler Roller Bearing
5. Install new seal (A) by pressing on the inner and outer
race of the seal until it is 3–4 mm (1/8–3/16 in.) (B)
from the outside edge of the tube.
Figure 5.128: Idler Roller Bearing
6. Install the idler roller (A) between the idler arms and
secure with two bolts (B). Torque bolts to 95 N
·
m
(70 ft
·
lbf).
Figure 5.129: Idler Roller
214044
165
Revision A