1.
Gather Flight Controller Board.
2.
Orient upright and forward by
looking for the forward direction
arrow printed on the circuit
board. The four motor
connectors are on the bottom
side of the flight controller.
3.
NOTE: Arrows MAY vary in
shape or size.
4.
With the arrow facing forward,
align the board with the forward
direction of the quadcopter for
visual orientation.
5.
Do not fully insert flight
controller into the airframe.
6.
Once the forward direction is
determined, set the flight
controller to the side.
7.
Gently pull the twisted motor
connector wires a little bit closer
to the center, through the
corresponding frame side.
INSTALLATION (CONT.)
32
