background image

NOTICE

All  instructions, warranties  and other  collateral documents are  subject  to change  at  the  sole discretion of  M1
DRONES LLC. For up-to-date product literature, visit M1DRONES.com and click on the support tab for this product.

Meaning of Special Language

The following terms are used throughout the product literature to indicate various levels of potential harm 
when operating this product:

NOTICE: 

Procedures, which if not properly followed, create a possibility of physical property damage AND possibility

of injury.

CAUTION: 

Procedures, which if not properly followed, create the probability of physical property damage AND

a possibility of serious injury.

WARNING

: Procedures, which if not properly followed, create the probability of physical property damage, 

collateral damage, and serious injury OR create a high probability of superficial injury.

WARNING:  

Read the ENTIRE instruction manual to become familiar with the features of the product before 

operating. Failure to operate the product correctly can result in damage to the product, personal property and

cause serious injury or death.

This is a sophisticated product. It must be operated with caution and common sense and requires some basic
mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or
damage to the product or other property. This product is not intended for use by children without direct adult
supervision. Do not use with incompatible components or alter this product in any way outside of the instructions
provided by M1 DRONES LLC. This manual contains instructions for safety, operation and maintenance. It is
essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in
order to operate correctly and avoid damage or serious injury.

FOR CURRENT FEDERAL AVIATION ADMINISTRATION (FAA) REGULATIONS VISIT 
WWW.KNOWBEFOREYOUFLY.ORG AND WWW.FAA.GOV/UAS 

FOR ADDITIONAL RESOURCES VISIT THE ACADEMY OF MODEL AERONAUTICS 
WWW.MODELAIRCRAFT.ORG

FOR M1 DRONES MANUAL RESOURCES PLEASE VISIT 

https://M1DRONES.com/

Age Recommendation: Not for children under 6 years of age. Safety Glasses

Recommended. Supervision REQUIRED for ages 6-12. This is not a toy.

3

Summary of Contents for M1 STEM Drone Series














































Reviews: