Flight Controller Function
The Flight Controller unit in your RV Micro is a powerful combination of processing and electronic speed
controls. This unit is equipped with white and red status indicator LEDs for easy understanding.
• Before each flight, power on the transmitter before connecting the flight battery to the RV Micro unit. After
each flight, disconnect the flight battery from the RV Micro before powering off the transmitter.
• The FlySky transmitter will arm the motors when the throttle stick is in the lowest possible position and all
switches are in the up position. The Transmitter will emit a warning if switches are in an incorrect position.
• With the FlySky transmitter turned on and the transmitter on home screen, it is safe to connect the flight
battery to the Flight Controller.
• Connect the flight battery to the flight controller unit. Center the Battery in its mounting slot. An un-centered
battery will cause the quadcopter to drift.
• After the flight battery is connected, place the RV Micro on a level surface. The flight controller status LED
should glow solid BLUE within a few seconds. DO NOT move, sway or pretend to fly the quadcopter after
connecting the flight battery. This movement can stop the unit initialization and calibration. If the quadcopter
is moved before the flight controller unit status LED glows solid, disconnect then re-connect the flight battery
to the flight controller.
• When the flight controller status LED glows solid, the control unit is initialized and ready for flight.
• Set the throttle stick to IDLE, select your flight mode using Switch B and toggle Switch D (SwD – Pre-Arm),
followed by Switch A (SwA – ARM).
CAUTION:
Use EXTREME caution, the RV Micro is now ARMED and READY FOR FLIGHT.
19
