M-system MFTW120IX, Instructions And Advice For Installing, Using And Servicing

Page: 78 / 120

17
GB
7
OVEN CAVITY
Do not spray or wash the thermostat bulb with acid
based products (check the product label before use).
The manufacturer cannot be held liable for any damage
caused by incorrect cleaning
The oven cavity should be cleaned after each use
to remove cooking residuals and or grease or sugar
which, if burnt on when the oven is used again, will
form deposits or unremovable stains as well as
unpleasant smells.
To maintain the shine of the enamelled parts, clean
them with warm soapy water, rinse and dry them
thoroughly. ALWAYS wash the accessories used.
OVEN SEAL
The oven seal guarantees the correct functioning of
the oven. We recommend you:
• clean it, avoiding abrasive tools or products.
• check its state now and then.
If the oven door seal has become hard or is
damaged, contact our Service Centre and avoid
using the oven until it has been repaired.
HOW TO CLEAN THE INNER OVEN DOOR GLASS
One of the features of our cookers is that the inner oven
door glass can be easily removed for cleaning without the
aid of specialized personnel. Just open the oven door and
remove the support securing the glass (fig. 8).
ATTENTION!!
This operation can be done also with the door
fitted on appliance, but in this way, pay attention
that when the glass is pull upwards, the force of
the hinges can close the door roughly.
CLEANING AND MAINTENANCE
• Prior to any maintenance work or cleaning,
disconnect the appliance from the electricity
mains.
• Do not wash the parts if they are still hot.
• Do not leave vinegar, coffee, milk, salty water
or the juice of lemon or tomato on enamelled
surfaces for any length of time.
To keep the surface of the hob and the various
components in pristine condition (grill, enamelled
covers, burner heads and flame diffusers, it is very
important to wash them in warm soapy water, rinse and
dry them well after each use.
WARNINGS
• Check that the heads burners and the relative burner
caps, are correctly positioned in their housings (fig. 8).
• Take care not to disturb the ignition spark plugs or
flame failure devices.
• If you find a tap is difficult to open or close do not force
it but call for technical assistance urgently.
STRUCTURE
All the cooker parts (in enamelled or painted metal, steel, or
glass) should be cleaned frequently with warm soapy water
and then rinsed and dried with a soft cloth.
INSTRUCTIONS FOR THE USER
8
Downloaded from www.vandenborre.be