45
47DM OPERATING MANUAL EM-9510-B Rev.6
■
IN MOVING ON TO EACH SETTING MODE FROM MEASURING MODE
• The last measured values or status are held for the DC and alarm outputs, and the BCD output is indefinite.
• Some alarm indicators turn on with parameter display. The alarm indication is due to the last status before mode transi-
tion held but does not show the unit failure.
• Mode transition is not available while ‘P.ERR’ is indicated. Eliminate the cause of the error and operate again. Refer to
34.1 ERROR MESSAGES for details.
■
ORDER TO DISPLAY PARAMETERS
• Some parameters may not be displayed depending on the lockout settings, I/O option and DC output.
• Refer to 5. PARAMETER CONFIGURATION for details.
■
TO TURN OFF POWER
• Delay power off for 10 seconds or more after changing of settings including the one set with the ZERO signal.
