197
47DM OPERATING MANUAL EM-9510-B Rev.6
• Forced Zero control lockout ‘LV1’ (unlock Forced Zero control / lock Tare Adjustment control)
(1) Press Up button in Measuring Mode to execute the Forced Zero.
(2) Hold down UP button for 1 second or more to cancel the Forced Zero mode.
NOTE
• The Forced Zero and Tare Adjustment cannot be executed but can be canceled while in the MAX/MIN Value Display
mode.
• The Forced Zero and Tare Adjustment can be executed or canceled while ‘S.ERR’ is indicated, though the values are
not warranted.
• The Forced Zero and Tare Adjustment cannot be executed or canceled for no measured data (RESET signal ON).
• The reference values in executing the Forced Zero and Tare Adjustment can be set to the ones other than ‘0’ using the
47DCFG or via Modbus communication. Refer to 47DCFG PC Configurator Software Users Manual and Modbus Proto-
col Reference Guide for 47Dx for details.
Present value
(Forced Zero
executed)
‘FZ’ & ‘TZ’
indicators OFF
‘FZ’ indicator ON
‘TZ’ indicator OFF
Forced Zero
Hold down Up for ≥ 1 sec. (Forced Zero canceled)
*
1 Display depends on the settings and input.
Press Up
