64
47DM OPERATING MANUAL EM-9510-B Rev.6
■
SHIFTING THROUGH SETTING PARAMETERS
(1) Parameter shifting in Scaling Setting Mode
In Scaling Setting Mode, pressing Alarm/
↓
button shifts one parameter to the next (clockwise in the following figure). Press-
ing Scale/
↑
button shifts one to the previous (counterclockwise).
NOTE
• The display depends on the specifications and settings. The above displays show default values.
• Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode from each parameter.
Bargraph lower limit
*
1
Input scaling value Span
Display scaling value Span
Decimal point position
Bargraph type
Display scaling value Zero
Input scaling value Zero
Measuring Mode
for ≥ 3 sec.
Hold down Scale/
↑
Analog output function mode
*
2
Analog output 0% adjustment
*
2
Analog output 100% adjustment
*
2
*
1 Disabled with “no bargraph” selected for the bargraph type parameter.
*
2 Disabled with no-DC-output type (DC output code ‘0’ ).
Scaling Setting Mode
Bargraph upper limit
*
1
Analog output type
*
2
Analog output 0%
*
2
Analog output 100%
*
2
