Electromagnetic Compatibility (EMC) User Information
WARNING:
Medical Electrical Equipment, such as the CLX Light Source, needs special precautions regarding
Electromagnetic Compatibility (EMC) and needs to be installed and put into service according to the EMC
information provided in the following tables.
WARNING
: Portable and Mobile RF Communications Equipment can affect Medical Electrical Equipment.
WARNING
: The CLX Light Source should not be used adjacent to or stacked with other equipment. If this becomes
necessary the CLX should be observed to verify normal operation in the configuration in which it will be used.
NOTE
: The EMC tables and other guidelines below provide information to the customer or user that is essential in
determining the suitability of the CLX Light Source for the Electromagnetic Environment of use, and in managing the
Electromagnetic Environment of use to permit the CLX Light Source to perform its intended use without disturbing
other Equipment and Systems or non-medical electrical equipment.
Guidance and Manufacturer’s Declaration – Emissions All Equipment and Systems
The
CLX Light Source
is intended for use in the electromagnetic environment specified below. The customer
or user of the
CLX Light Source
should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Enforcement – guidance
RF Emissions
CISPR 11
Group 1
The
CLX Light Source
uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF Emissions
CISPR 11
Class A
The
CLX Light Source
is suitable for use in all establishments
including domestic, and those directly connected to the public low-
voltage power supply network that supplies buildings used for domestic
purposes.
Harmonics
IEC 61000-3-2
Complies or
Not applicable
Complies
Flicker
IEC 61000-3-3
Complies or
Not applicable
Complies
- 11 -
