User Guide
- 5
–
3 Safety Precautions
Glossary
Caution risk of danger
– consult accompanying documents
Caution eye damage may result from directly viewing ultraviolet light
–
protective eye shielding and clothing must be used at all times.
Input/Output Signals
Input Signal
The S2000 is equipped with two safety sensors to protect the user from accidental
UV exposure. In addition, please observe the following precautions during use.
This Series of cautions, warnings and dangers relate to the operation and
maintenance of the S
2000. They are also presented throughout this User’s Guide
where necessary.
Warning
Eye damage may result from directly viewing the light produced by the lamp used
in this product. Always use the UV protective eyewear supplied with the unit and
always turn the lamp off before removing lamp housing cover.
Caution
Never look into the light emitting end of the light guide. The light could severely
damage the cornea and retina of the eye if the light is observed directly. Eye
shielding must be used at all times as well as clothing to protect exposed skin.
Warning
Always make sure the light guide is properly inserted into the S2000 prior to turning
on POWER to the unit. This will minimize the risk of exposure to the UV light.
Warning
To reduce the risk of fire or shock, always replace the fuses with the same type
and rating. Always detach the POWER supply cord prior to attempting to replace
fuses!
Warning
Disconnecting of the main supply source is only possible by unplugging the
POWER cord.
