29
IMPORTANT NOTICE!
A loose spark plug can overheat and damage the
engine. Overtightening the spark plug can damage
the thread in the cylinder head.
Guideline:
Used spark plug: 1/8 - 1/4 turn
New spark plug: 1/2 turn
16.8
Safety installations
Check safety installations (EMERGENCY STOP) for
function and perfect technical condition, replace
damaged components if necessary.
Interval: weekly
16.9
Checking wheels and tyre pressure
Wheels (tread and tyre condition) and tyre
pressure:
–
Check the screw connection on the wheel
axles for correct seating.
–
Look out for cuts and foreign bodies in the
tread of the tyres
–
Check tyre pressure
max. 2.5 bar (transport wheels)
max. 1.5 bar (steering wheels)
Interval: weekly
16.10 Rubber protection flap
If the rubber protection flap (X) shows wear, it
must be replaced.
Interval: with wear
Rubber protection flap
16.11 Cleaning the machine
Check the machine for contamination after use.
Dirt accumulation (twigs, wood debris, dust,
adhering leaf green, etc.) inside the machine must
be removed.
Interval: after use
In the event of contamination:
1.
Switch off the machine and secure it against
being switched on again (disconnect the
ignition plug).
2.
Remove contamination properly. Keep in
mind:
–
do not use a high-pressure cleaner
–
do not use aggressive cleaning agents
–
Take up oil separations with binding agent
–
Dispose of cleaning cloths and processing
residues in an environmentally friendly
manner in compliance with applicable local
regulations
–
use a soft brush or a vacuum cleaner for
interior cleaning
–
After the cleaning work, check that all
previously opened covers and safety devices
have been properly closed again and are
functional.
ATTENTION!
After cleaning and when the machine is not in use
for a longer period of time, all moving parts must
be greased or oiled.
IMPORTANT NOTICE!
Do not allow water to get on the bearings or on the
motor during cleaning. It can get into tight slots
and damage spindles, pulleys, bearings and the
engine. After cleaning, grease or oil all lubrication
points and run the machine briefly to force out any
water that has entered.
16.12 Checking, retightening the fastening
elements
Switch off the machine and secure it against being
switched on again.
1.
Check all screw connections for tight fit,
retighten
loose
screw
connections
if
necessary.
Summary of Contents for RAMBO-HC15PRO
Page 37: ...37...
