30
If necessary, replace screw connection
elements that cannot be tightened with new
bolts and nuts.
2.
Check the technical condition of the blades by
visual and tactile inspection, if necessary
replace the blades immediately if defects are
detected.
3.
If cracks or other damages are evident,
determine the cause, repair welded joint and
reinforce the joints.
4.
Check other fastenings such as glued joints,
pin connections, etc. for technical condition by
visual and tactile inspection; if necessary,
repair loosened connections properly.
Interval: weekly
16.13 Checking, repairing the construction
1.
Check the entire steel construction for proper
technical condition by visual inspection.
2.
Have detected defects such as hairline cracks,
gaps, deformations or loose parts repaired by
the manufacturer or an authorised specialist
company.
3.
Treating paint damage: Clean damaged areas,
apply corrosion protection agent, apply new
paint after drying.
4.
Check all screw connections and fasteners for
secure fit, retighten screw connections or
replace fasteners if necessary.
5.
Check all anchor points for damage and tight
fit, if necessary have loosened or damaged
components replaced by the manufacturer or
an authorised specialist company.
Interval: monthly
17.
Transport
DANGER!
Danger of burns due to hot surfaces on the
engine!
Contact with hot components can cause burns.
–
Wear protective clothing and protective gloves
when working near hot components.
–
Before carrying out any work, allow the hot
components to cool down to below +50°C.
Before transporting and / or relocating or storing
indoors:
1.
Switch off the engine of the machine and
allow it to cool down to avoid burns and
exclude fire hazard.
2.
Remove spark plug connector.
3.
Close fuel switch.
4.
Empty fuel tank to prevent fuel overflow.
IMPORTANT NOTICE!
Machines with gasoline engines may be tilted for
transport, but must not be turned over any further,
as engine oil can get into the air filter.
–
This can put the engine out of operation!
The machine must not be tilted more than 20°.
Persons must not be endangered by the machine
tipping or slipping, or by machine parts swinging
up or down.
17.1
Transport by hand
Grip the machine by the drawbar, lift it slightly and
move it.
17.2
Transport with chassis
1.
Attach the trailer coupling to the towing
vehicle.
2.
Connect the safety chain to the towing vehicle.
3.
Check tyre pressure, max. 2.5 bar (transport
wheels)
Summary of Contents for RAMBO-HC15PRO
Page 37: ...37...
