Lumag RAMBO-HC15PRO, Original Operation Manual

Page: 17 / 38

17
13. Drive type
13.1 Gasoline engine
The machine is powered by a gasoline engine. For
instructions on starting and stopping the gasoline
engine, please refer to the engine user manual or
the next pages of this manual.
See also...
COMMISSIONING / Starting the engine (15.2) and
stopping the engine (15.3)
IMPORTANT NOTICE!
When delivered, the engine of the machine does
not contain engine oil and fuel. Fill the drive motor
as described under “REFUELLING”.
13.2. Refuelling
WARNING!
You may only carry out the work described in this
chapter after you have read and understood the
safety instructions. It concerns your personal
safety.
13.2.1 Filling up engine oil
IMPORTANT NOTICE!
Engine oil must be filled up before the first
commissioning! Incorrect oil filling can cause
irreparable damage to the engine. In this case, the
seller as well as the manufacturer distance
themselves from any warranty claims.
–
Set up the machine level and stable so that the
engine is horizontal.
– Use commercially available engine oil with the
specification SAE 10W-30 or 10W-40 .
– Correct oil level is between upper and lower
level.
Check engine oil level
Switch off the engine and let it cool down.
1. Unscrew the oil dipstick.
2. Wipe the oil dipstick with a clean rag and
reinsert, do not screw in.
3. Pull out the oil dipstick again and read off the
oil level, if necessary fill engine oil up to the
lower edge of the oil filler opening.
Use chute!
4. Tighten the oil dipstick.
5. Wipe away oil residues / contamination.
Engine oil viscosity
Filling up engine oil
Filling quantity: approx. 1.1 litres
Do not overfill!
ATTENTION!
When the engine is running, the oil filler bolt
must always be firmly seated in the filler neck!
IMPORTANT NOTICE!
Using SAE 30 oil below 10°C will result in harder
starting and possible damage to the engine bore
due to insufficient lubrication.