Lumag RAMBO-HC15PRO, Original Operation Manual

Page: 31 / 38

31
ATTENTION!
If the machine is unhitched from the towing
vehicle, it must be parked on a horizontal, level
and firm ground.
IMPORTANT NOTICE!
The machine is not approved for public road traffic.
18. Storage
Storage of the machine and temporary shutdown.
Store the machine under the following
conditions:
– Do not store outdoors
– Store upright
– Store in a dry and dust-free place
– Do not expose to aggressive media
– Protect from sunlight
– Avoid mechanical shocks
– Storage temperature: 5 to 45°C
– Relative humidity: max. 60 %.
– If stored for longer than 3 months, regularly
check the general condition of all parts and
the packaging. If necessary, refresh or renew
the preservation.
– Remove soil, dirt and debris from engine and
machine. Clean the engine with a cloth
– Treat moving parts with environmentally
friendly oil (do not use grease!) and
commission the machine briefly (let it run for
1-2 minutes)
– Drain fuel by running the engine until fuel is
used up
– Clean air filter, replace if necessary
– Check function of all moving parts, repair or
replace if necessary
– Remove spark plug connector.
– Check the screws and the counter and
shredding blades mounted on the drum
– Check drive belt tension
– Check wheels and tyre pressure
– Secure the machine against rolling away and
unauthorised use (wheel chock)
– Cover the machine and engine to protect them
from dust