21
Start with electric starter (E-START)
14.3
Switching off the engine
1.
Push the throttle lever (8) to the right to the
idle position LOW (=TURTLE).
2.
Turn the ignition key on E-start (1) to the OFF
position and remove.
3.
Then turn the fuel switch (5) to the left to the
OFF position to close it.
When leaving the machine, remove the spark
plug connector (9) = protection against
unauthorised use!
ATTENTION! Never set the choke valve to
CLOSE to stop the engine. This can lead to re-
ignition or engine damage.
Switch off engine
IMPORTANT NOTICE!
Suddenly stopping the engine at full throttle can
cause engine damage.
14.4
Stopping the engine in an emergency
In dangerous situations, machine movements must
be stopped as quickly as possible and the energy
supply must be switched off.
In case of danger:
1.
Press the safety bar (10) on the infeed chute,
an EMERGENCY STOP is initiated.
2.
Inform the responsible person at the site of
operation.
3.
If necessary, alert doctor and fire department.
4.
Rescue injured persons, initiate first aid
measures.
5.
Switch off the engine switch (1) and secure it
against being switched on again.
6.
Keep access routes clear for emergency
vehicles.
To restart, push the lever on the safety bar (10) to
the right and move the engine switch to the ON
position, then start the engine as described in
COMMISSIONING / Start process (14.2).
14.5
Idle speed
When not shredding, move the throttle lever (8) to
the LOW position to reduce the load on the engine.
Reducing engine speed at idle extends the lifespan
of the engine, saves fuel and reduces noise levels.
Summary of Contents for RAMBO-HC15PRO
Page 37: ...37...
