About Point-to-Point Diagnostics
-1
WaveLAN/ISA Card User’s Guide
5
The Point-to-Point Diagnostics Utility
5
About Point-to-Point
Diagnostics
5
The Point-to-Point Diagnostic Utility is a MS-DOS based
utility that allows you to verify the communications path
between two WaveLAN stations, or between a
WaveLAN station and WavePOINT access point.
You can use this utility to:
●
Check that cards and antennas function correctly to
allow exchange of messages
●
Optimize antenna positioning
●
Verify whether stations are within operating range of
each other
●
Diagnose the occurrence of local RF noise and
environmental suitability.
The Point-to-Point Diagnostics Utility has a log-file
option, to save measurement data to a disk file.
Note:
The Point-to-Point Diagnostic is a MS-DOS based utility.
If you would like to run this utility on a Windows 95/NT
computer, the computer must have MS-DOS installed.
Restart the computer in MS-DOS mode, as you can not
run the utility from an MS-DOS box under Windows.
isa-src.bk : isa-ch5.frm Page 1 Monday, October 14, 1996 1:23 PM
