Installing the WaveLAN Card
Preparation
WaveLAN/ISA Card User’s Guide
2-3
Table 2-1
I/O Base Address Switch Settings
Setting the Remote Boot ROM's Base Address
2
The Remote Boot base address switches are factory
preset to disable remote boot. You should change this
setting only if you have installed the Remote Boot ROM
on the card and intend to use it immediately. Table 2-2
shows which remote boot base addresses are available:
Table 2-2
Boot ROM Base Address Settings
Use a small flat-blade screwdriver to set the switches.
I/O Base Address
Switch 1
Switch 2
0300H - 030FH
OFF
OFF
0390H - 039FH
OFF
ON
03C0H - 03CFH
ON
OFF
03E0H - 03EFH
ON
ON
Caution: I/O Address 03C0H is used by many EGA and VGA video adapter cards.
If your video adapter is using this I/O address, DO NOT USE IT for the WaveLAN
card.
Boot ROM Base Address
Switch 3
Switch 4
DISABLED
OFF
OFF
C8000H - CBFFFH
OFF
ON
D0000H - D3FFFH
ON
OFF
D8000H - DBFFFH
ON
ON
isa-src.bk : isa-ch2.frm Page 3 Monday, October 14, 1996 1:23 PM
