Getting Started
Preparing for Installation
WaveLAN/ISA User’s Guide
1-7
operating frequency. The procedure is described in
Chapter 3, “Installing the Software” with references to
the appropriate appendices.
3. Test the Communications Path (optional)
1
When you have installed at least two WaveLAN cards,
or if a WavePOINT access point is installed, you can run
the Point-to-point Diagnostics utility to check out your
WaveLAN installation. Using the Point-to-point
Diagnostics utility is described in Chapter 5, “The Point-
to-Point Diagnostics Utility”.
Before you begin
1
Use the MS-DOS
Diskcopy
command to create a working
copy of your WaveLAN diskette. Use your working copy
in all card configuration and driver installation
procedures. Store the original in a safe place.
isa-src.bk : isa-ch1.frm Page 7 Monday, October 14, 1996 1:23 PM
