Troubleshooting
Error Messages
WaveLAN/ISA Card User’s Guide
4-9
Invalid Combination of
keywords
4
Cause:
More than one card location keyword is present
in the configuration file (NET.CFG or
PROTOCOL.INI).
Action: Select one card location keyword to specify the
correct card location:
PORT
(NET.CFG) or
AT_Address
(PROTOCOL.INI). If no location is
specified, the driver will automatically select the
first card found.
Invalid <
parameter
>
<
parameter
> = FRAME
STATION ADDRESS, STATION_ADDRESS
NWID
Cause:
An invalid parameter value was passed to the
driver in the NET.CFG or PROTOCOL.INI file.
Action: Edit NET.CFG or PROTOCOL.INI to correct the
parameter value, and reload the driver.
IRQ Conflict or Card not
functioning correctly
4
Cause:
Card malfunction, or IRQ number is used by
another program
Action: Check if the IRQ is already in use by another
program. If so, run SETIRQ.BAT (Appendix C)
to configure another IRQ for the WaveLAN card.
If possible try the card in another computer to
verify that the problem is in the card and not its
environment.
Security Feature not
functioning correctly
4
Cause:
Start-up diagnostics have determined that the
Security Feature is defective
Action: Replace the card, or run with Security disabled
(see next message action).
Security Feature not available
4
Cause:
The configuration installed on the card indicates
that Datalink Security is enabled, but the card is
not equipped with the Security Feature.
Action: Replace the card by one that includes the
security feature, or reconfigure to disable
isa-src.bk : isa-ch4.frm Page 9 Monday, October 14, 1996 1:23 PM
