Installing the Software
Installation Procedure
3-2
WaveLAN/ISA Card User’s Guide
Installation Procedure
3
Copy the Software
3
To install the WaveLAN software on the computer's hard disk,
proceed as follows:
1
Choose a name for the hard disk directory where the
software will be kept, e.g.
c:\wavelan
2
Place the WaveLAN software diskette in drive A:
3
Make drive A: the current drive and run the batch
file CPY2HDSK.BAT with the chosen hard disk
directory name as parameter. Example DOS
commands:
a:
cpy2hdsk c:\wavelan
Create a Utilities
Diskette
3
The Utilities diskette will enable you to run diagnostics and
other WaveLAN utilities. You will use this diskette to reboot
your computer whenever you need to run one of the
WaveLAN utitlities
1
Change to the hard disk directory where the
WaveLAN software was installed.
2
Insert a DOS-formatted diskette in drive A:
3
Run the batch file UTL2BOOT.BAT. Example DOS
commands:
c:
cd \wavelan
utl2boot
Install theNetwork
operating Software
3
Use the documentation that comes with the network operating
system to do the installation. If asked to insert a diskette
containing an
“updated”
,
“OEM”
, or
“other vendor”
- supplied
driver, insert the WaveLAN diskette in drive A:.
isa-src.bk : isa-ch3.frm Page 2 Monday, October 14, 1996 1:23 PM
