The Point-to-Point Diagnostics Utility
Running Point-to-Point Diagnostics
5-8
WaveLAN/ISA Card User’s Guide
Figure 5-3
5
Measurements Log File Example
Command Line
Parameters
5
If you are a skilled computer technician, you may wish
to use one of the following parameter options on the MS-
DOS command line to:
●
Specify an I/O Base address
●
Specify a WaveLAN Network ID
●
Specify a station name
●
Select monochrome display mode
The following parameters are shown in uppercase for
clarity. You can also use lowercase characters.
This “position” parameter is related to the card’s I/O
Base address as shown in the table below:
Table 5-1
I/O Base Address parameter
:
P-value
1
2
3
4
I/O Base Address
‘0300’H
‘0390’H
‘03c0’H
‘03e0’H
isa-src.bk : isa-ch5.frm Page 8 Monday, October 14, 1996 1:23 PM