Troubleshooting
Error Messages
4-8
WaveLAN/ISA Card User’s Guide
Action: This may be a transient or permanent problem.
Try the program reporting the error again. If the
message persists, replace the card. If possible,
try the card in another PC to verify that the
problem is in the card and not its environment.
Configuration Install utility
should be run
4
Cause:
The card has not been properly configured, or
the configuration data has become corrupted.
Action: Run the utilities SETCONF.EXE and
INSTCONF.EXE. These utilities are in directory
\UTIL on the WaveLAN software diskette.
Could not find driver named
WVLN09$
4
Cause:
The WaveLAN NDIS driver could not find the
device name in the PROTOCOL.INI file. This is
most likely caused by an invalid device name in
the
DRIVERNAME=
statement in
PROTOCOL.INI
Correct the
DRIVERNAME=
statement and reload the
driver.
Error opening WAVELAN.INI
file
4
Cause:
An attempt was made to start a utility and the
utility could not find the WAVELAN.INI file.
Action: If you need to run the utility from a floppy disk,
ensure that WAVELAN.INI and the network
configuration file are also on the disk and that
WAVELAN.INI contains the correct path to the
network configuration file (NET.CFG or
PROTOCOL.INI).
Error writing new
configuration to the card
4
Cause:
A hardware malfunction prevented the card
configuration from being updated.
Action: This may be a transient or permanent problem.
Try to install the new configuration again. If the
message persists, replace the card. If possible,
try the card in another computer to verify that
the problem is in the card and not its
environment.
isa-src.bk : isa-ch4.frm Page 8 Monday, October 14, 1996 1:23 PM
