Lucent Technologies PacketStar PSAX, User Manual

Page: 87 / 405

Chapter 4 Configuring the Interfaces Using the Console Interface
Managing ATM IISP User and Network Interfaces
4-14 255-700-243
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
The window status line prompts:
Taking the interface down will cause all SVCs to be lost.
Continue? (y/n)
2
Select Y.
The interface is taken out of service. The value OutOfService is now
displayed in the [Admin Status] and the [Oper Status] fields. If a connec-
tion is already configured for this interface, the traffic flow is stopped. To
resume traffic on the connection using this interface, you must bring the
interface back into service (see the section, “Bringing One or More ATM
IISP Interfaces into Service).
End
Deleting One or More ATM IISP Interfaces
Begin
You can do this task from several different windows. To delete one or more
ATM UNI interfaces, perform the steps in the following procedure.
1
Make sure the interface is out of service before deleting it. See the “Tak-
ing One or More IISP Interfaces Out of Service” procedure if you need to
the take the interface out of service.
2
Depending on which module you are working with and which window
you have currently displayed, select one of the following deletion com-
mands on the type of window shown in Table 4-4:
•
Delete All Interfaces
•
Delete All Interfaces On This Port
•
Delete Interface and Return
Table 4-4. Windows on Which You Can Delete One or More ATM IISP Interfaces
If the module you are working
with is: you can delete one or more interfaces on
these windows:
an unchannelized single-port
module,
•
Port and channel configuration window
Note:
On this window for this type of
module, you delete a single interface by
selecting
Unconfigured in the Interface
Type field.
•
ATM IISP Interface Configuration win-
dow (deletes the interface for a single
channel)