Lucent Technologies PacketStar PSAX, User Manual, Page: 47 / 405

Chapter 3 Configuring Ports and Channels Using the Console Interface
Obtaining General Module Data and Accessing Ports and Channels
3-2 255-700-243
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Obtaining General Module Data and Accessing Ports and
Channels
This section describes how to obtain product, model, version, and serial num-
ber data about a module from the Equipment Configuration window. You
also use this window to access the port and channel configuration windows
for the PSAX modules.
Begin
Accessing the Equipment Configuration Window
1 On the Console Interface Main Menu window, select the Equipment
Configuration
option.
The Equipment Configuration window is displayed (see Figure 3-2
through Figure 3-6). The commands and fields on this window are
described in the tables following the figures.
2 View the module status, software version, PEC, and serial number data.
3 When you are ready to begin configuring the ports and channels of the
module, select the line displaying the name of the module you want to
configure.
Figure 3-1. Loopback Configuration Options on the 12-Port Medium-Density DS1
Multiservice Module
Local Loop
Line Driver
Receiver
Port
Connector
Backplane
Connector
Line Driver
Receiver
Backplane
Connector
Line Loop
Signal
Port Connector
Framing Chip
Payload Loop
Backplane
Connector