Lucent Technologies PacketStar PSAX, User Manual

Page: 172 / 405

255-700-243 4-99
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Chapter 4 Configuring the Interfaces Using the Console Interface
Managing HDLC Passthrough Interfaces
You can do this task from several different windows (see Table 4-3). To take
one or more interfaces out of service, perform the steps in the following pro-
cedure.
Begin
1
Depending on the module you are using, select either the Take Inter-
face Out Of Service or the Take All Interfaces Out Of Service com-
mand on the type of window shown in Table 4-3.
The window status line prompts:
Taking the interface down will cause all SVCs to be lost.
Continue? (y/n)
Table 4-30. Windows on Which You Can Take an HDLC Passthrough Interface Out
of Service
If the module you are working
with is: you can take one or more interfaces out of
service on these windows:
an unchannelized single-port
module,
•
Port and channel configuration window
• HDLC Pass Through Interface Configura-
tion window
an unchannelized multiport
module, • Module configuration window (all inter-
faces for all ports)
•
Port and channel configuration window
• HDLC Pass Through Interface Configura-
tion window
a channelized single-port
module, • Port configuration window (all inter-
faces for all virtual ports)
•
Virtual port configuration window (all
channel interfaces on a virtual port)
• Channel configuration window (just the
interface for the channel)
•
HDLC Pass Through Interface Configura-
tion window (just the interface for the
channel)
a channelized multiport
module,
•
Module configuration window (all inter-
faces for all ports)
• Port and channel configuration window
(all channel interfaces on a port)
•
Channel configuration window (just the
interface for the channel)
• HDLC Pass Through Interface Configura-
tion window (just the interface for the
channel)