Lucent Technologies PacketStar PSAX, User Manual

Page: 129 / 405

Chapter 4 Configuring the Interfaces Using the Console Interface
Managing CAS Trunkline Interfaces
4-56 255-700-243
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Managing CAS Trunkline Interfaces
This section provides instructions for managing interfaces by performing the
following tasks:
•
Configuring and applying interface(s)
•
Bringing interface(s) into service
•
Taking interface(s) out of service
•
Viewing interface(s)
•
Deleting interface(s)
•
Viewing interface statistics
Configuring a CAS Trunkline Interface
Begin
Note:
You must have the Channelization field on your module port and
channel configuration window set to
Enabled before you can con-
figure the CAS Trunkline interface.
1
On the CAS Interface Configuration window (see Figure 4-9), select the
values for the fields from Figure 4-9. Table 1-1 describes the commands
on this window.
2
Go to the next procedure.
End