Lucent Technologies PacketStar PSAX, User Manual, Page: 306 / 405

PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
255-700-243 A-1
A
Pin Configurations
Overview of This Appendix
This appendix describes the pin assignments for the connectors on the
12-Port Medium-Density DS1 Multiservice module. Use the following infor-
mation to connect correctly configured cables to this module.
Configurations for the MD DS1 Module Connectors
The following table shows the pin configurations for the 12-Port Medium-
Density DS1 Multiservice module connector. Each port consists of two sets of
signal pairs. Note that one set is not used.
Table A-1. Mini-Champ Pinouts for the MD DS1 Module
Top Row
Tip Pin # Bottom Row
Ring Pin #
Network
Signal Pair
Connector
Port
Connector
1 26 Rx 1 1
2 27 Tx 1 1
3 28 Rx 2 2
4 29 Tx 2 2
5 30 Rx 3 3
6 31 Tx 3 3
7 32 Rx 4 4
8 33 Tx 4 4
9 34 Rx 5 5
10 35 Tx 5 5
11 36 Rx 6 6
12 37 Tx 6 6
13 38 Not Used Not Used
14 39 Rx 7 7
15 40 Tx 7 7
16 41 Rx 8 8
17 42 Tx 8 8
18 43 Rx 9 9
19 44 Tx 9 9
20 45 Rx 10 10
21 46 Tx 10 10