Lucent Technologies PacketStar PSAX, User Manual

Page: 86 / 405

255-700-243 4-13
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Chapter 4 Configuring the Interfaces Using the Console Interface
Managing ATM IISP User and Network Interfaces
the interface is in service. Look in the command field at the bottom of
each of these window for the command to take the interface(s) out of
service, and select it if necessary.
You need to take an ATM IISP interface out of service first before you can
perform the following tasks:
•
Deleting an interface
• Performing diagnostic or maintenance procedures on an interface
You can do this task from several different windows (see Table 4-3). To take
one or more interfaces out of service, perform the steps in the following pro-
cedure.
Begin
1 Depending on the module you are using, select either the Take Inter-
face Out Of Service or the Take All Interfaces Out Of Service com-
mand on the type of window shown in Table 4-3.
Table 4-3. Windows on Which You Can Take an IISP Interface out of Service
If the module you are working
with is: you can take one or more interfaces out of
service on these windows:
an unchannelized single-port
module,
•
Port and channel configuration window
• IISP Interface Configuration window
an unchannelized multiport
module, • Module configuration window (all inter-
faces for all ports)
•
Port and channel configuration window
• IISP Interface Configuration window
a channelized single-port
module, • Port configuration window (all inter-
faces for all virtual ports)
•
Virtual port configuration window (all
channel interfaces on a virtual port)
• Channel configuration window (just the
interface for the channel)
•
IISP Interface Configuration window
(just the interface for the channel)
a channelized multiport
module,
•
Module configuration window (all inter-
faces for all ports)
• Port and channel configuration window
(all channel interfaces on a port)
•
Channel configuration window (just the
interface for the channel)
• IISP Interface Configuration window
(just the interface for the channel)