Lucent Technologies PacketStar PSAX, User Manual, Page: 136 / 405

255-700-243 4-63
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Chapter 4 Configuring the Interfaces Using the Console Interface
Managing CAS Trunkline Interfaces
The following prompt is displayed:
Take the interface down Although Not Operational. Continue?
(y/n)
2
Type y to continue.
The value OutOfService is now displayed in the [Admin Status] and the
[Oper Status] fields. If a connection is already configured for this inter-
face, the traffic flow is stopped. To resume traffic on the connection using
this interface, you must bring the interface back into service (see the sec-
tion, “Bringing One or More CAS Trunkline Interfaces into Service).
End
Deleting One or More CAS Trunkline Interfaces
You need to delete an CAS Trunkline interface before you can replace an
interface for a specified port and channel.
Note:
Before you can delete an CAS Trunkline interface, you must first
take the interface out of service. See the section, “Taking One or
More CAS Trunkline Interfaces out of Service.”
You can do this task from several different windows. To delete one or more
CAS Trunkline interfaces, perform the steps in the following procedure.
Table 4-18. Windows on Which You Can Take an CAS Trunkline Interface out of
Service
If the module you are working
with is: you can take one or more interfaces out of
service on these windows:
a channelized single-port
module,
•
Port configuration window (all inter-
faces for all virtual ports)
•
Virtual port configuration window (all
channel interfaces on a virtual port)
•
Channel configuration window (just the
interface for the channel)
•
CAS Trunkline Interface Configuration
window (just the interface for the chan-
nel)
a channelized multiport
module,
•
Module configuration window (all inter-
faces for all ports)
• Port and channel configuration window
(all channel interfaces on a port)
•
Channel configuration window (just the
interface for the channel)
• CAS Trunkline Interface Configuration
window (just the interface for the chan-
nel)