255-700-243
4-67
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide
, Issue 1
Release 8.0
Chapter 4 Configuring the Interfaces Using the Console Interface
Managing Circuit Emulation Interfaces
8
On the Circuit Emulation Interface Configuration window, enter the val-
ues in the fields on this window according to the information provided in
Table 4-20.
9
Select the
Apply Interface Configuration
command to set the valus
you selected.
10
If your configuration requires you to bring the interface into service at
this time, do so by selecting the
Bring Interface Into Service
com-
mand. For more information on other configuration windows on which
you can bring interfaces into service, see the “Bringing One or More Cir-
cuit Emulation Interfaces into Service” procedure in this guide.
End
Commands
The commands on this window have the following functions:
Figure 4-10. Circuit Emulation Interface Configuration Window
Summary of Contents for PacketStar PSAX
