Lucent Technologies Metropolis DMXplore, Installation Manual

Page: 230 / 330

...........................................................................................................................................................................................................................................................
Ring Setup and Testing: Integration Procedures Fiber Installation
8 - 6 365-372-334 R2.0
Issue 4, November 2004
Important! For DS3, zzz is STS1, and x is b.
...........................................................................................................................................................................
Step 6
Click
Send
to issue the command.
Result: All STS1 default cross connections on the shelf will be
deleted.
...........................................................................................................................................................................
Step 7 Use the scroll bar in the Command Builder window to scroll down to
the
ent-oc3(sb)
or
ent-oc12(sb)
command.
...........................................................................................................................................................................
Step 8 Click on the ent-oc3(sb) or ent-oc12(sb) command. Under the
<OCnSB>
select
Application={1+1}.
Double click on
{1+1}
and select
UPSR .
...........................................................................................................................................................................
Step 9
Click
Send
to issue the command.
Result: A command similar to the following example will be
displayed in the command window to the left of the
Send
button.
Example:
ent-oc3(oc12):lt-dmxplore:main-1:2:::application=UPSR;
...........................................................................................................................................................................
Step 10 Enable the RNESTAT at each node.
For Metropolis
®
Product family network elements, use the ENT-SYS
command and highlight
RNESTAT
. Double click on
{DISABLED}
and
select ENABLED .
...........................................................................................................................................................................
Step 11
Enable the AGNE on only one of nodes in the network.
If AGNE is a part of the Metropolis
®
Product family, at the AGNE use
the ENT-SYS command and highlight AGNE . Double click on {NO}
and select
YES
, then send the command.
...........................................................................................................................................................................
Step 12 Dress optical cables out of the shelf to the right side of the shelf if the
shelf is a Wall-Mount Metropolis
®
DMXplore. If the shelf is the Rack-