LTH Electronics MTD75, Operation Manual

Page: 83 / 266

Inhibitor
MTD75 Operation Guide - 81 -
Inh
ibitor
Inhibitor Trigger Source
The user can select to initiate the Inhibitor dose in a
number of ways by selecting the appropriate trigger
condition. Selecting “Off” from the “Source” menu
item can permanently deactivate the Inhibitor relay
output.
Bleed will only be shown if the bleed relay has been
configured (see page 74).

/

– Select Option
EXIT
– Cancel
– Save Selection
Mode
Selecting off-line causes the Inhibitor relay to de-
energise. Useful for when commissioning or
calibrating the instrument.
When the unit is placed in an off-line state “off-line”
will appear in the relay’s message section on the
front screen.
If a “Cannot Edit Digital Input Has Control” message
appears, then an associated digital input is currently
controlling the on-line / off-line state of the relay.

/

– Select Option
EXIT
– Cancel
– Save Selection
Bleed Time
Trigger the Inhibitor relay after the entered
accumulated bleed time.
Only available when the source is set to “Bleed”.

/

– Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value