LTH Electronics MTD75, Operation Manual

Page: 224 / 266

Appendix D
- 222 -
MTD75 Operation Guide
Appe
ndix D
Electrodeless Conductivity Sensor Calibration Integer Variables Continued
3064 Get/Set ECS Cal Rem
Month
INT The time of the next
Calibration Reminder – Month
element 1-12 Month of Year
3065 Get/Set ECS Cal Rem
Year
INT The time of the next
Calibration Reminder – Year
element 0-3999 Year
Electrodeless Conductivity Sensor Calibration Floating Point Variables
3080 Get/Set ECS Cal Temp
Man Input
FLOAT The Electrodeless Conductivity
User Cal manual temperature
input
-20.0 to +150.0°C or
-4.0 to +302.0°F
3082 Get ECS Cal Offset FLOAT The Electrodeless Conductivity
User Cal Solution Offset value 80.00 to 120.00%
3084 Get ECS Temp Cal
Offset
FLOAT The Electrodeless Conductivity
Temperature User Cal Offset
value
-25.0 to +25.0°C or
-13.0 to +77.0°F
pH Sensor Configuration Integer Variables
3100 Get pH Card INT Is the pH card present 1120 = Not Present
1122 = pH Present
3101 Get/Set pH Enable INT The current status of the pH
sensor enable 1540 = Yes
1541 = No
3102 Get/Set pH Mode INT The current status of the pH
sensor Mode 1080 = Online
1081 = Offline
3103 Get/Set pH Sensor
Temp Type
INT The pH temperature sensor
type 1069 = PT1000
1070 = PT100
1074 = Disabled
3104 Get/Set pH Temp Units INT The pH sensor temperature
units 1040 = °C
1041 = °F
3105 Get/Set pH Temp Comp
Mode
INT The pH sensor temperature
compensation mode 1046 = Auto
1047 = Manual
3106 Get/Set ECS Input Filter INT The current status of the
Electrodeless Conductivity
Input Filter 1050 = OUT
1051 = 10 Seconds
1052 = 20 Seconds
1053 = 40 Seconds
1054 = 1 Minutes
1055 = 3 minutes
1056 = 5 Minutes
pH Sensor Configuration Floating Point Variables
3120 Get/Set pH Temp Man
Input
FLOAT The pH Temperature
Compensation Manual
Temperature Input -20.0 to +150.0°C or
-4.0 to +302.0°F
pH Sensor Configuration Long Variables
3140 Get pH Serial No. LONG The Serial Number of the pH
input card 0 to 9999999