Update Software
MTD75 Operation Guide
- 157 -
Update
Softw
are
Update Software
The MTD75 operating software can be upgraded by saving the latest version from LTH onto a SD card,
inserting it into the instrument and following the instructions below. All three files must be present on
the SD card for the update to work. If the card is not formatted correctly the controller will inform the
user, the card must then be reformatted using the Format SD Card function.
Caution! The MTD75 update may take up to 5 minutes, during which time the unit will not operate.
Update Software
Select the update software option from within the
configuration menu.
/
– Select Option
EXIT
– Return to Main Menu
– Enter Option
Update Software
Verify that the new software is of a higher version
than the current one shown. It is recommended that
the entire unit is saved before the update is started.
See the “Save Setup” section for instructions.
Select start to continue.
/
– Select Option
EXIT
– Return to Configuration Menu
– Enter Option
Update Software
If the controller has verified that all of the required
software is present on the SD card press enter to
begin the update.
During the update the display and LEDs will indicate
the progress of the update.
Once finished the controller will restart automatically.
EXIT
– Return to Update Software Menu
– Begin Update
Summary of Contents for MTD75
