LSI Mylex PCI Disk Array Controllers Driver, Installation Manual

Page: 79 / 104

Solaris
Manual No. DB11-000030-00 7-3
7
S
O
L
A
R
I
S
CD-ROM. If you have a network installation, verify with your system
administrator that the Solaris Network Installation image is available
on your network.
3. When the Solaris Device Configuration Assistant screen is displayed,
choose the F4 option (on Solaris 7, this is labeled as, F4_Add Driver).
4. Follow the directions on the next screen, the Install Supplemental
Drivers screen.
5. Now, remove the Solaris Device Configuration Assistant Diskette from
the disk drive, then insert the MDAC Supplemental Diskette.
6. Press F2 to continue. (F2 means “Continue”)
The Select Solaris System Version screen is displayed. Press Enter to
choose the Solaris operating system. It will show up as:
[ ] Solaris OS 2.7
7. Select the appropriate Solaris Operating System and press F2.
Two screens will be displayed.
• The Loading Supplemental Driver Software screen is displayed,
along with a progress bar that shows the status of processing the
mdac.itu driver. The driver is read into memory and survives long
enough for the system to successfully boot to its installation
program. The driver loaded is:
mdac.itu
• The Continue Supplemental Driver Installation screen is displayed
when the new driver on the diskette has been processed.
8. Now, remove the MDAC Supplemental Diskette from the disk drive
and then insert the Solaris Device Configuration Assistant diskette.
9. Press F4 to finish the driver installation. You will see the following
display:
mdac - Device Driver
You will see the Bus Enumerating screen with the following message:
“Determining bus and gathering hardware
configuration information” is displayed.