LSI Mylex PCI Disk Array Controllers Driver, Installation Manual

Page: 57 / 104

Windows 2000
Manual No. DB11-000030-00 5-5
5
W
I
N
2
0
0
0
7. If you have drivers to install for other controllers (for example, an
on-board SCSI controller to run other devices such as a CD-ROM
drive, etc.), repeat Step 4 and Step 5. Then when prompted, insert the
manufacturer’s supplied hardware support disk, press Enter, and select
the appropriate driver from the list.
If you installed other drivers from other diskettes, you will be asked to
reinsert those diskettes, as well, for additional drivers if additional
hardware was found.
If you have no other drivers to install, or when you have finished
installing other drivers, simply press Enter to continue the installation.
8. Finally, you will be prompted to remove any diskettes and CD-ROMs,
and you will be instructed to press Enter to reboot the system.
This concludes Mylex Disk Array Controller driver primary installation for
Windows 2000 when using eXtremeRAID 2000, eXtremeRAID 3000,
AcceleRAID 160/170LP, AcceleRAID 170, or AcceleRAID 352.
Please continue with the Microsoft Windows 2000 Installation Procedure.
Performing a Secondary Installation
If you have reached this point:
• You already have a system with Windows 2000 installed on it.
• You have added an eXtremeRAID 2000, eXtremeRAID 3000,
AcceleRAID 160/170LP, AcceleRAID 170, or AcceleRAID 352 into
your system.