LSI Mylex PCI Disk Array Controllers Driver, Installation Manual

Page: 56 / 104

Mylex Disk Array Controller Drivers for Windows 2000
5-4 PCI Disk Array Controller Drivers Manual
1. As soon as the screen turns blue, press F6 so that the correct driver will
be installed for one of these controllers: eXtremeRAID 2000,
eXtremeRAID 3000, AcceleRAID 160/170LP, AcceleRAID 170, or
AcceleRAID 352.
2. You will see a screen with two options. Respond to the following
option:
To specify additional SCSI adapters, CD-ROM drives, or special disk
controllers for use with Windows 2000, including those for which you
have a device support disk from a mass storage device manufacturer,
press S.
3. Choose S to specify an additional device.
4. When prompted for the Manufacturer’s supplied hardware support
disk, insert your Mylex Windows 2000 Drivers Software Kit diskette
into the floppy disk drive and press Enter.
You will see a screen with the following information:
You have chosen to configure a SCSI Adapter for use with Windows
2000, using a device support disk provided by an adapter
manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
5. Use the scroll bar (if available) to locate and select one of the following
devices:
Mylex AcceleRAID 160 Disk Array Controller
1
Mylex AcceleRAID 170 Disk Array Controller
Mylex AcceleRAID 352 Disk Array Controller
Mylex eXtremeRAID 2000 Disk Array Controller
Mylex eXtremeRAID 3000 Disk Array Controller
6. With the Software Kit diskette still in the floppy disk drive, select your
controller and press Enter. The driver will load and the installation
program will ask you if you want to install any additional drivers.
1. Important: Select this device for the AcceleRAID 170LP also.