14/70
“LS Ubiquitous RF-ID System”
PART 2
Chapter 1 LGRF-H Reader Introduction
1.1 Product Overview
LGRF-H Reader is able to recognize various kinds of tags by adapting the international
standard (ISO15693) which fits in the area of logistics, inventory, personnel management and
Factory Automation (FA). The size was minimized to enable the application in various areas and
the user can select the product with either the embedded antenna or external antenna
according to the purpose. This product provides Multi-Drop function that enables to control 16
RFID Readers only by one communication port from the Host (PLC, PC etc.) and is designed
according to the standard of industrial product.
1.2 RFID Introduction
RF-ID stands for Radio Frequency Identification and means non-contact recognizing
device by using a radio frequency. For example, this device was used to recognize the
objects, persons, and animals. The information of recognized target is recorded in the Tag
and the recorded information in the tag is obtained by the Reader.
The figure below shows the method of recognizing the goods by using the general RFID
system.
•
Example of recognizing the goods by RF-ID system
Summary of Contents for LGRF-H
Page 23: ...23 70 LS Ubiquitous RF ID System 2 4 Product Appearance and Dimension Fig 2 4 1 LGRF H Reader...
Page 24: ...24 70 LS Ubiquitous RF ID System Fig 2 4 2 LGRF H Reader Fig 2 4 3 Antenna A Type...
Page 25: ...25 70 LS Ubiquitous RF ID System Fig 2 4 4 Antenna B Type Fig 2 4 5 Antenna C Type...
Page 70: ...70 70 LS Ubiquitous RF ID System 2 Example of MELSEC PLC ASCII mode communication...
