40/70
“LS Ubiquitous RF-ID System”
2) Host control mode (Slave Read: Product Release Mode)
[Fig. 4.1.1.3] Slave mode
This mode means the mode that if Host issues a specific command to Reader, Reader
interprets that command and carries out the command (the command based on ISO 15693
Command) to the Tag.
This is a Command Control mode that no action is carried out before issuing the specific
command such as read or write etc. from the host such as the upper PC or PLC etc. even if Tag
approaches within Read Zone of Reader, other than Scan Read mode. In order to carry out the
desired action, the relevant command from the upper Host should be given.
[Fig. 4.1.1.4] shows the Operation Flow in Host Control Mode.
Summary of Contents for LGRF-H
Page 23: ...23 70 LS Ubiquitous RF ID System 2 4 Product Appearance and Dimension Fig 2 4 1 LGRF H Reader...
Page 24: ...24 70 LS Ubiquitous RF ID System Fig 2 4 2 LGRF H Reader Fig 2 4 3 Antenna A Type...
Page 25: ...25 70 LS Ubiquitous RF ID System Fig 2 4 4 Antenna B Type Fig 2 4 5 Antenna C Type...
Page 70: ...70 70 LS Ubiquitous RF ID System 2 Example of MELSEC PLC ASCII mode communication...
