12/70
“LS Ubiquitous RF-ID System”
3.4 Power Supply
In order to run the Reader stably, the power of good quality should be supplied. You
should check if the operation voltage and consumption current are satisfied with the
required condition.
3.4.1 Supply Power Specification
Operation voltage : DC24
±
20%
Consumption current : 200 mA
3.4.2 Wiring
It is necessary to consider that the power wiring from power supply device to Reader
should be free from inductive noise.
WARNING
Supply the power according to the condition described in the product
rated power specification.
If not, it may cause the electric shock, fire, malfunction, product damage or deterioration.
WARNING
Do not carry out the wiring work while applying the electric current.
It may cause the injury and product damage.
WARNING
When applying the power, you should confirm the completion of
checking.
If not, it may cause the fire and product damage.
Summary of Contents for LGRF-H
Page 23: ...23 70 LS Ubiquitous RF ID System 2 4 Product Appearance and Dimension Fig 2 4 1 LGRF H Reader...
Page 24: ...24 70 LS Ubiquitous RF ID System Fig 2 4 2 LGRF H Reader Fig 2 4 3 Antenna A Type...
Page 25: ...25 70 LS Ubiquitous RF ID System Fig 2 4 4 Antenna B Type Fig 2 4 5 Antenna C Type...
Page 70: ...70 70 LS Ubiquitous RF ID System 2 Example of MELSEC PLC ASCII mode communication...
